1983 Toyota Celica GT-S - Message Forum (22RE Clutch Problem)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

22RE Clutch Problem

Posted By:	Darril
Posted On:	September 30, 2002 at 6:11 pm EDT

Hey gang i have a 91 Toyota Pickup with a 88 or 89 Toyota 22RE engine in it. The original engine blew a headgasket and the previous owner replaced the motor with either a 88 or 89 22RE. This is the first 22RE ive ever owned, so i do not know anything about it. Anyways, here is the problem i am having.

The truck sat for an extended amount of time, and when i went to go move it, i pushed in the clutch to start the truck, but the clutch wouldnt budge. I pushed a little harder and the clutch pedal "broke" free. Now for some reason, the truck will not go into any gear. The clutch pedal does not have the same resistance now. The clutch pedal will return back to its original position, but when you push on it, it feels as if the pedal is not travelling as far as it should, and the tranny wont go into any gear, whether the truck is running or not. I have no idea what the problem is. Can anyone add any insight? Thanks in advance.

Darril

Replys:

Re: 22RE Clutch Problem - Jon A 09/30/02 (5)

Re: 22RE Clutch Problem - Darril 09/30/02 (4)

Re: 22RE Clutch Problem - Dave 10/01/02 (3)

Re: 22RE Clutch Problem - Darril 10/01/02 (2)

Re: 22RE Clutch Problem - Dave 10/02/02 (1)

Re: 22RE Clutch Problem - Darril 10/02/02 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Darril wrote: > Hey gang i have a 91 Toyota Pi > ckup with a 88 or 89 Toyota 22 > RE engine in it. The original > engine blew a headgasket and t > he previous owner replaced the > motor with either a 88 or 89 > 22RE. This is the first 22RE i > ve ever owned, so i do not kno > w anything about it. Anyways, > here is the problem i am havin > g. > > The truck sat for an extended > amount of time, and when i wen > t to go move it, i pushed in t > he clutch to start the truck, > but the clutch wouldnt budge. > I pushed a little harder and t > he clutch pedal "broke" free. > Now for some reason, the truck > will not go into any gear. Th > e clutch pedal does not have t > he same resistance now. The cl > utch pedal will return back to > its original position, but wh > en you push on it, it feels as > if the pedal is not travellin > g as far as it should, and the > tranny wont go into any gear, > whether the truck is running > or not. I have no idea what th > e problem is. Can anyone add a > ny insight? Thanks in advance. > > Darril
	Please click submit only once

Note: For security reasons your IP will be logged!