1983 Toyota Celica GT-S - Message Forum (Re: COLD AIR INTAKE FOUND!!!!!!)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: COLD AIR INTAKE FOUND!!!!!!

Posted By:	Tim
Posted On:	March 18, 2003 at 02:31 am GMST

Yea, it probably is bent for that structure. I hope it isnt, but if it is, i will prolly end up going and doing what Luis did, and get one of those intake piping kits for 30 bux from kragen down here. If he ever emails me back (just emailed him today) then i will tell you guys the part number in which to refer to when looking for the pipe kit to use. I will buy that pipe kit and see what all, if anything, needs to be done to fit the thing onto our systems. I know that kragen sells Intake piping kits that are made by APC (www.americanproductscompany.com). If you guys want to look there for the pipes that look like they would fit, and get back to me before luis does, i will go to kragen and buy the kit you think would work. Ill try to fit it and tell you how it goes.

Lates,
Tim

Bridge wrote:

> I think its made only for the
> Pick Ups. My friend has a PU a
> nd his intake system is all th
> e was over by the exhaust mani
> fold (Where our batterie is).
> If they are for the PU/4X4 the
> n the tubes are probly bent to
> fit that engine compartment.

Replys:

Re: COLD AIR INTAKE FOUND!!!!!! - Jarett 03/18/03 (4)

Re: COLD AIR INTAKE FOUND!!!!!! - Bridge 03/18/03 (3)

Re: COLD AIR INTAKE FOUND!!!!!! - Tim 03/18/03 (2)

Re: COLD AIR INTAKE FOUND!!!!!! - jay 08/12/03 (0)

Re: COLD AIR INTAKE FOUND!!!!!! - Tim 03/18/03 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Tim wrote: > Yea, it probably is bent for t > hat structure. I hope it isnt, > but if it is, i will prolly e > nd up going and doing what Lui > s did, and get one of those in > take piping kits for 30 bux fr > om kragen down here. If he eve > r emails me back (just emailed > him today) then i will tell y > ou guys the part number in whi > ch to refer to when looking fo > r the pipe kit to use. I will > buy that pipe kit and see what > all, if anything, needs to be > done to fit the thing onto ou > r systems. I know that kragen > sells Intake piping kits that > are made by APC (www.americanp > roductscompany.com). If you gu > ys want to look there for the > pipes that look like they woul > d fit, and get back to me befo > re luis does, i will go to kra > gen and buy the kit you think > would work. Ill try to fit it > and tell you how it goes. > > Lates, > Tim > > > Bridge wrote: > > > I think its made only for th > e > > Pick Ups. My friend has a PU > a > > nd his intake system is all > th > > e was over by the exhaust ma > ni > > fold (Where our batterie is) > . > > If they are for the PU/4X4 t > he > > n the tubes are probly bent > to > > fit that engine compartment.
	Please click submit only once

Note: For security reasons your IP will be logged!