1983 Toyota Celica GT-S - Message Forum (AFM Modification)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

AFM Modification

Posted By:	Tim
Posted On:	April 27, 2003 at 4:30 pm GMST

Ive got a great idea on removing our AFM. We would need these things
1. 3" Pipe
2. Circular Plate with thread tube going down the middle (somewhat like in our throttle bodies)
3. Casing for AFM Internals (shaped like (] )
4. A way to strap the internals onto the pipe.

Ok, here is what we would do

1. Drill into the pipe for the screw to go down from the AFM into the threads on the circular plate.

2. Drill a hole in the pipe for the sensor stud.

3. Put in the sensor stud, and screw down the screw into the threads on the circular plate.

4. Somehow manage to strap on the afm.

Wa-La - Non Restrictive AFM. I am working on Tricking the computer so that all we need to do is put in the sensor stud and hard wire it to the correct point on the AFM connector cable.

Replys:

Re: AFM Modification - James 04/27/03 (8)

Re: AFM Modification - Tim 04/27/03 (7)

Re: AFM Modification - James 04/27/03 (6)

Re: AFM Modification - Tim 04/27/03 (5)

Re: AFM Modification - James 04/27/03 (4)

Re: AFM Modification - Tim 04/27/03 (3)

Re: AFM Modification - Joshua S 04/27/03 (2)

Re: AFM Modification - Tim 04/27/03 (1)

Re: AFM Modification - Tim 04/27/03 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Tim wrote: > Ive got a great idea on removi > ng our AFM. We would need thes > e things > 1. 3" Pipe > 2. Circular Plate with thread > tube going down the middle (so > mewhat like in our throttle bo > dies) > 3. Casing for AFM Internals (s > haped like (] ) > 4. A way to strap the internal > s onto the pipe. > > Ok, here is what we would do > > 1. Drill into the pipe for the > screw to go down from the AFM > into the threads on the circu > lar plate. > > 2. Drill a hole in the pipe fo > r the sensor stud. > > 3. Put in the sensor stud, and > screw down the screw into the > threads on the circular plate > . > > 4. Somehow manage to strap on > the afm. > > Wa-La - Non Restrictive AFM. I > am working on Tricking the co > mputer so that all we need to > do is put in the sensor stud a > nd hard wire it to the correct > point on the AFM connector ca > ble.
	Please click submit only once

Note: For security reasons your IP will be logged!