1983 Toyota Celica GT-S - Message Forum (Re: 85 Celica GT Bolt Pattern)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: 85 Celica GT Bolt Pattern

Posted By: Bruce Thorson

Posted On: July 08, 2002 at 1:26 pm EDT

The offset needed varies with width, the wider the wheel, the smaller the offset (to maintain proper backspacing). The 14x5.5" Alloys on my '84 GT Coupe have a 22mm offset.

Bruce

Steven Benner wrote:

> Yep 60.1mm centerbore and 4:11
> 4.3 (4x4.5") bolt circle. The
> stock wheel offset is 8mm. Ver
> y hard to get the right offset
> .
>
> Steve
>
>
> Bruce Thorson wrote:
>
> > I believe all 82-85 Celica's
> a
> > re 4x114.3mm (4x4.5") .
> >
> > Bruce

Replys:

Post a Reply:

Name:
Email:
Subject:
Message:	Bruce Thorson wrote: > The offset needed varies with > width, the wider the wheel, th > e smaller the offset (to maint > ain proper backspacing). The 1 > 4x5.5" Alloys on my '84 GT Cou > pe have a 22mm offset. > > Bruce > > Steven Benner wrote: > > > Yep 60.1mm centerbore and 4: > 11 > > 4.3 (4x4.5") bolt circle. Th > e > > stock wheel offset is 8mm. V > er > > y hard to get the right offs > et > > . > > > > Steve > > > > > > Bruce Thorson wrote: > > > > > I believe all 82-85 Celica > 's > > a > > > re 4x114.3mm (4x4.5") . > > > > > > Bruce
	Please click submint only once

Note: For security reasons your IP will be logged!