This is an archived message.
The reply function is disabled.
[ Message Forum | Thread Index | Post a Reply ]
Re: 85 Celica GT Bolt Pattern
Posted By: Bruce Thorson Posted On: July 08, 2002 at 1:31 pm EDT
The problem with obtaining the proper offset is that most wheels are designed for FWD cars.
Bruce
Steven Benner wrote:
> Yep 60.1mm centerbore and 4:11
> 4.3 (4x4.5") bolt circle. The
> stock wheel offset is 8mm. Ver
> y hard to get the right offset
> .
>
> Steve
>
>
> Bruce Thorson wrote:
>
> > I believe all 82-85 Celica's
> a
> > re 4x114.3mm (4x4.5") .
> >
> > Bruce
Replys:
Note: For security reasons your IP will be logged!
Copyright © 2001 - 2002 Steven Benner. All rights reserved.
Last Modified: Saturday, July 06, 2002 11:11 AM