1983 Toyota Celica GT-S - Message Forum (Re: Terrible engine noise)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: Terrible engine noise

Posted By:	Byron
Posted On:	August 03, 2003 at 6:47 pm GMST

So what do you have the timing set at now? If you have it set at the CORRECT 5BTDC then setting it at 8 or 12 would be advancing it now retarding. Even my 83 22RE is supposed to set at 5btdc. It's usually only the 22R's that were set at 8btdc.

luis wrote:

> The head,chain,guides,camshaft
> ,water pump,distributor and tp
> s are new,i replaced everythin
> g about 6 months ago,it doesnt
> burn or leak any oil from any
> were i can go along time witho
> ut adding any oil(all gaskets
> are new too),but i have notice
> that if i retard the timing t
> o like 8 or 12 btdc the noise
> goes away but then theres no p
> ower and it has no torque or t
> op end,i doble checked the tim
> ing and its supose to be at 5
> btdc for the 85 (lazer block o
> r tall block used from 85-95 f
> or 22rs)and not at 8 like the
> 84 and early models,well i hop
> e to find the problem soon i d
> ont want to damage or blow my
> motor.thanks.

Replys:

Re: Terrible engine noise - luis 08/03/03 (2)

Re: Terrible engine noise - Byron 08/04/03 (0)

Re: Terrible engine noise - buz 08/03/03 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Byron wrote: > So what do you have the timing > set at now? If you have it se > t at the CORRECT 5BTDC then se > tting it at 8 or 12 would be a > dvancing it now retarding. Eve > n my 83 22RE is supposed to se > t at 5btdc. It's usually only > the 22R's that were set at 8bt > dc. > > > luis wrote: > > > The head,chain,guides,camsha > ft > > ,water pump,distributor and > tp > > s are new,i replaced everyth > in > > g about 6 months ago,it does > nt > > burn or leak any oil from an > y > > were i can go along time wit > ho > > ut adding any oil(all gasket > s > > are new too),but i have noti > ce > > that if i retard the timing > t > > o like 8 or 12 btdc the nois > e > > goes away but then theres no > p > > ower and it has no torque or > t > > op end,i doble checked the t > im > > ing and its supose to be at > 5 > > btdc for the 85 (lazer block > o > > r tall block used from 85-95 > f > > or 22rs)and not at 8 like th > e > > 84 and early models,well i h > op > > e to find the problem soon i > d > > ont want to damage or blow m > y > > motor.thanks.
	Please click submit only once

Note: For security reasons your IP will be logged!