1983 Toyota Celica GT-S - Message Forum (Re: engine will not start 22r-ec engine)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: engine will not start 22r-ec engine

Posted By:	chris
Posted On:	August 29, 2003 at 03:36 am GMST

Thanks for the reply. I have that ground connection on. As for the timing, I used a timing light. I set the crankshaft pulley timing mark to 0 on the number 1 cylinder's compression stroke and lined up the distributor rotor to the number 1 spark plug wire.

Joshua S wrote:

>
> I had the smae problem when I
> replasced my head gasket on my
> 85 GT-S, it turned out that I
> over looked a ground connecti
> on on the intake manifold down
> were the upper and lower mani
> fold bolt together. Try there.
>
> When you timed the engine: how
> did you time the engine.

Replys:

Post a Reply:

Name:
Email:
Subject:
Message:	chris wrote: > Thanks for the reply. I have t > hat ground connection on. As f > or the timing, I used a timing > light. I set the crankshaft p > ulley timing mark to 0 on the > number 1 cylinder's compressio > n stroke and lined up the dist > ributor rotor to the number 1 > spark plug wire. > > > Joshua S wrote: > > > > > I had the smae problem when > I > > replasced my head gasket on > my > > 85 GT-S, it turned out that > I > > over looked a ground connect > i > > on on the intake manifold do > wn > > were the upper and lower man > i > > fold bolt together. Try ther > e. > > > > When you timed the engine: h > ow > > did you time the engine.
	Please click submit only once

Note: For security reasons your IP will be logged!