1983 Toyota Celica GT-S - Message Forum (Re: I give up!!!)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: I give up!!!

Posted By:	Bridge
Posted On:	August 30, 2003 at 3:37 pm GMST

They sell electronic contact cleaner... its a strong spray and it avaporates very quickly after you use it so the electronic dont short out. buy some of that and clean out your injuector wires.

Joshua: if the valves werent opening but the gases still were being injected in, i think that would cause a major problem... considering how much gas bild up there would be in the head i'd think it would start to run out of your intake manifold after running the engine for a number of minutes.

Joshua S wrote:

> Our you sure you valves are op
> ening on the last to cylinders
> ?
> I this may stupid, but have yo
> u removed the valve cover chec
> ked to see if you cam is broke
> n or you forgot to adjust the
> last four valves on the engine
> so they are not opening so no
> gas is get to the cylinders.
> I know it is dumb but you have
> tried every thing else.
> Back to the injector plugs, ar
> e the contacts drity or corrod
> ed so no signal to the injecto
> rs.

Replys:

Re: I give up!!! - Joshua S 08/31/03 (0)
Re: I give up!!! - Evan 08/30/03 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Bridge wrote: > They sell electronic contact c > leaner... its a strong spray a > nd it avaporates very quickly > after you use it so the electr > onic dont short out. buy some > of that and clean out your inj > uector wires. > > Joshua: if the valves werent o > pening but the gases still wer > e being injected in, i think t > hat would cause a major proble > m... considering how much gas > bild up there would be in the > head i'd think it would start > to run out of your intake mani > fold after running the engine > for a number of minutes. > > > Joshua S wrote: > > > Our you sure you valves are > op > > ening on the last to cylinde > rs > > ? > > I this may stupid, but have > yo > > u removed the valve cover ch > ec > > ked to see if you cam is bro > ke > > n or you forgot to adjust th > e > > last four valves on the engi > ne > > so they are not opening so n > o > > gas is get to the cylinders. > > I know it is dumb but you ha > ve > > tried every thing else. > > Back to the injector plugs, > ar > > e the contacts drity or corr > od > > ed so no signal to the injec > to > > rs.
	Please click submit only once

Note: For security reasons your IP will be logged!