This is an archived message.
The reply function is disabled.
[ Message Forum | Thread Index | Post a Reply ]
Re: I give up!!!
| Posted By: | Evan |
| Posted On: | August 30, 2003 at 5:19 pm GMST |
lol ya....I did that too.....thats what I was figuring too....like I tried everything else....so I checked the cam to see if by fluke it broke.....but....all in check.......the injectors are old....but clean.....and the ones that arent working in #3 and #4 work in 1 and 2....so.....I dunno.....Im just wondering if the injectors arent sealing right....letting too much air in or something
Joshua S wrote:
> Our you sure you valves are op
> ening on the last to cylinders
> ?
> I this may stupid, but have yo
> u removed the valve cover chec
> ked to see if you cam is broke
> n or you forgot to adjust the
> last four valves on the engine
> so they are not opening so no
> gas is get to the cylinders.
> I know it is dumb but you have
> tried every thing else.
> Back to the injector plugs, ar
> e the contacts drity or corrod
> ed so no signal to the injecto
> rs.
Replys:
Note: For security reasons your IP will be logged!
Copyright © 2001 - 2003 Steven Benner. All rights reserved.
Last Modified: Wednesday, March 19, 2003 9:00 AM