1983 Toyota Celica GT-S - Message Forum (engine identification)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

engine identification

Posted By:	jarettm
Posted On:	October 19, 2003 at 08:35 am GMST

this might be a big post. I'm trying to find out what exact motor I have in my car. I always thought that I had the 22RE in there, but a couple of things are different, so now I'm not so sure. First off, I got a crack in my PCV valve. When I went to replace it, the replacement one that I got from BAP was like twice as long. I went back to BAP and got the PCV valve for a 20R, and it was still too big. Also, in a lot of pictures that I've seen that show a 22RE, there's what I'm guessing to be a vacuum valve in front of the distributor. I don't have one of those. Anyone have any ideas?

Replys:

Re: engine identification - OldMage 10/20/03 (0)
Re: engine identification - Grant W. 10/19/03 (2)

Re: engine identification - jarettm 10/20/03 (1)

Re: engine identification - OldMage 10/21/03 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	jarettm wrote: > this might be a big post. I'm > trying to find out what exact > motor I have in my car. I alwa > ys thought that I had the 22RE > in there, but a couple of thi > ngs are different, so now I'm > not so sure. First off, I got > a crack in my PCV valve. When > I went to replace it, the repl > acement one that I got from BA > P was like twice as long. I we > nt back to BAP and got the PCV > valve for a 20R, and it was s > till too big. Also, in a lot o > f pictures that I've seen that > show a 22RE, there's what I'm > guessing to be a vacuum valve > in front of the distributor. > I don't have one of those. Any > one have any ideas?
	Please click submit only once

Note: For security reasons your IP will be logged!