1983 Toyota Celica GT-S - Message Forum (Re: Turbocharing 85 Celica)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: Turbocharing 85 Celica

Posted By:	Derek
Posted On:	March 21, 2004 at 10:11 pm GMST

Hmmmmmmmmmm... a 22RTE ECU might work, although the stock ECU should be able to handle about 6 psi. you will want a water cooled turbo, which means you need to find a way to get water to it.. an oil cooler is also a good idea, and and intercooler should be used (the intercooler in a mitsu starion or eclipse works well).
RWDcelicadude on the new forums has a turbo celica and can probably tell you a lot more than I can.

Jeremy wrote:

> I am going to be picking up a
> 85 Celica. I find out that it
> has 9.0 : 1 Compression piston
> s and I really want to put a t
> urbocharger on it.  Sounds rea
> sonable to have a T-25 or some
> mildly small turbo hanging of
> f it running 7-10 psi sounds v
> ery reasonable
>
> I can fabricate the manifold m
> yself, and exhaust system.
>
> My question is which ECU can I
> use to make the car run prope
> rly and handle forced inductio
> n.  There should be another to
> yota that I can get the turbo
> MAS, injectors, ECU..   I need
> to know how much wiring or ex
> tra parts (beside the turbocha
> rger) I need to make this happ
> en.

Replys:

Post a Reply:

Name:
Email:
Subject:
Message:	Derek wrote: > Hmmmmmmmmmm... a 22RTE ECU mig > ht work, although the stock EC > U should be able to handle abo > ut 6 psi. you will want a wate > r cooled turbo, which means yo > u need to find a way to get wa > ter to it.. an oil cooler is a > lso a good idea, and and inter > cooler should be used (the int > ercooler in a mitsu starion or > eclipse works well). > RWDcelicadude on the new forum > s has a turbo celica and can p > robably tell you a lot more th > an I can. > > Jeremy wrote: > > > I am going to be picking up > a > > 85 Celica. I find out that i > t > > has 9.0 : 1 Compression pist > on > > s and I really want to put a > t > > urbocharger on it. Sounds r > ea > > sonable to have a T-25 or so > me > > mildly small turbo hanging o > f > > f it running 7-10 psi sounds > v > > ery reasonable > > > > I can fabricate the manifold > m > > yself, and exhaust system. > > > > My question is which ECU can > I > > use to make the car run prop > e > > rly and handle forced induct > io > > n. There should be another > to > > yota that I can get the turb > o > > MAS, injectors, ECU.. I ne > ed > > to know how much wiring or e > x > > tra parts (beside the turboc > ha > > rger) I need to make this ha > pp > > en.
	Please click submit only once

Note: For security reasons your IP will be logged!