1983 Toyota Celica GT-S - Message Forum (Re: bolt on Turbo's)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: bolt on Turbo's

Posted By:	Derek
Posted On:	April 16, 2004 at 10:23 pm GMST

First off, the stock 22R-TE turbo manifold WILL NOT fit in a celica.
Most people go with a garrett T3/T4 hybrid turbo.
9.7:1 is kinda high for turbo, you might get 5-6 PSI out of that (maybe less, I dunno)
Chris wrote:

> I have a RA-64 Celcia GT which
> i am in the process of turboc
> harging, I have the 22RET-C tu
> rbo manifold,downpipe , LC eng
> ineering pistons with 9:7:1 co
> mp ratio , twin side draft mak
> uni carbs, but i still need to
> get the actual turbo, does an
> ybody know of a good turbo tha
> t will bolt on easily other th
> an the stock turbo?

Replys:

reason why it won't fit??? - chris 04/19/04 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	Derek wrote: > First off, the stock 22R-TE tu > rbo manifold WILL NOT fit in a > celica. > Most people go with a garrett > T3/T4 hybrid turbo. > 9.7:1 is kinda high for turbo, > you might get 5-6 PSI out of > that (maybe less, I dunno) > Chris wrote: > > > I have a RA-64 Celcia GT whi > ch > > i am in the process of turbo > c > > harging, I have the 22RET-C > tu > > rbo manifold,downpipe , LC e > ng > > ineering pistons with 9:7:1 > co > > mp ratio , twin side draft m > ak > > uni carbs, but i still need > to > > get the actual turbo, does a > n > > ybody know of a good turbo t > ha > > t will bolt on easily other > th > > an the stock turbo?
	Please click submit only once

Note: For security reasons your IP will be logged!