|
Home
Technical Specs
Pictures
Modifications
Resources
Contact
Message Forum
This is an archived message.
The reply function is disabled.
|
[ Message Forum | Thread Index | Post a Reply ]
Open Element Air Cleaner
| Posted By: |
Terry |
| Posted On: |
August 05, 2002 at 8:33 pm GMDT |

Here's a cheap way I did this:
I picked up a air cleaner cover at a junkyard. Using a drill/cutting disks I cut four huge squares into the cover. Imagine the cover is square with the snaps (snaps that hold the cover to the MAF) forming the sides of the square. Do not cut past the imaginary corner of the square (imagine then that the snaps are at the end of a band, and the band goes to the top of the air cleaner cover). Put a K&N in and it works well!

Replys:
Post a Reply:
Note: For security reasons your IP will be logged!
Copyright © 2001 - 2002 Steven Benner. All rights reserved.
Last Modified: Wednesday, July 17, 2002 2:38 AM
|
|