Steven Benner's 1983 Celica GT-S     Forum  

Home

Technical Specs

Pictures

Modifications

Resources

Contact

Message Forum

 

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Re: 85 head onna 83 block

Posted By: Derek
Posted On: November 24, 2004 at 7:34 pm GMST

If you are 100% certain the celica you pulled it from is an 85, it WILL NOT WORK. None of the 85's got the early 22RE with the dome pistons, only the late 22RE with the flat ones.


Erick  wrote:

> Some 85 Celica's used the 84 m
> otor which is the same as 83.
> Check to see if the exhaust po
> rts are the same.  You do not
> want the key hole shaped ports
> .  This head would then be fro
> m the new 85 motor and your 83
> pistons will not allow you to
> use it. 83 has the dome top p
> iston and the newer 85 is desi
> gned to be used with the flat
> top piston. Once the bad 83 he
> ad is off, you will see if the
> y are exactly the same and if
> not, the differences will noti
> cable.
>
>
> pahhhoul wrote:
>
> > I cracked the head on my 83
> 22
> > RE engine. I grabbed a 22RE
> he
> > ad offa 85 celica.
> >
> > Please tell me that the 85 2
> 2R
> > E head will work on my 83 bl
> oc
> > k.

Replys:

 

Post a Reply:

Name:
Email:
Subject:
Message:
 
Please click submit only once

Note: For security reasons your IP will be logged!

 

 

Copyright © 2001 - 2003 Steven Benner. All rights reserved.
Last Modified: Wednesday, March 19, 2003 9:00 AM