1983 Toyota Celica GT-S - Message Forum (Pictures of my 85 head that I grabbed)

Forum

Home

This is an archived message.
The reply function is disabled.

[ Message Forum | Thread Index | Post a Reply ]

Pictures of my 85 head that I grabbed

Posted By:	paul
Posted On:	December 06, 2004 at 09:03 am GMST

well.. here are the pictures of the head that I grabbed offa an 85.

http://www.eskabodaan.org/dart/celica_port_close.jpg

http://www.eskabodaan.org/dart/celica_port_overview.jpg

tell me what you guys think.

Derek wrote:

> If you are 100% certain the ce
> lica you pulled it from is an
> 85, it WILL NOT WORK. None of
> the 85's got the early 22RE wi
> th the dome pistons, only the
> late 22RE with the flat ones.
>
>
> Erick  wrote:
>
> > Some 85 Celica's used the 84
> m
> > otor which is the same as 83
> .
> > Check to see if the exhaust
> po
> > rts are the same.  You do no
> t
> > want the key hole shaped por
> ts
> > .  This head would then be f
> ro
> > m the new 85 motor and your
> 83
> > pistons will not allow you t
> o
> > use it. 83 has the dome top
> p
> > iston and the newer 85 is de
> si
> > gned to be used with the fla
> t
> > top piston. Once the bad 83
> he
> > ad is off, you will see if t
> he
> > y are exactly the same and i
> f
> > not, the differences will no
> ti
> > cable.
> >
> >
> > pahhhoul wrote:
> >
> > > I cracked the head on my 8
> 3
> > 22
> > > RE engine. I grabbed a 22R
> E
> > he
> > > ad offa 85 celica.
> > >
> > > Please tell me that the 85
> 2
> > 2R
> > > E head will work on my 83
> bl
> > oc
> > > k.

Replys:

Re: Pictures of my 85 head that I grabbed - paul 12/06/04 (0)

Post a Reply:

Name:
Email:
Subject:
Message:	paul wrote: > well.. here are the pictures o > f the head that I grabbed offa > an 85. > > http://www.eskabodaan.org/dart > /celica_port_close.jpg > > http://www.eskabodaan.org/dart > /celica_port_overview.jpg > > tell me what you guys think. > > > Derek wrote: > > > If you are 100% certain the > ce > > lica you pulled it from is a > n > > 85, it WILL NOT WORK. None o > f > > the 85's got the early 22RE > wi > > th the dome pistons, only th > e > > late 22RE with the flat ones > . > > > > > > Erick wrote: > > > > > Some 85 Celica's used the > 84 > > m > > > otor which is the same as > 83 > > . > > > Check to see if the exhaus > t > > po > > > rts are the same. You do > no > > t > > > want the key hole shaped p > or > > ts > > > . This head would then be > f > > ro > > > m the new 85 motor and you > r > > 83 > > > pistons will not allow you > t > > o > > > use it. 83 has the dome to > p > > p > > > iston and the newer 85 is > de > > si > > > gned to be used with the f > la > > t > > > top piston. Once the bad 8 > 3 > > he > > > ad is off, you will see if > t > > he > > > y are exactly the same and > i > > f > > > not, the differences will > no > > ti > > > cable. > > > > > > > > > pahhhoul wrote: > > > > > > > I cracked the head on my > 8 > > 3 > > > 22 > > > > RE engine. I grabbed a 2 > 2R > > E > > > he > > > > ad offa 85 celica. > > > > > > > > Please tell me that the > 85 > > 2 > > > 2R > > > > E head will work on my 8 > 3 > > bl > > > oc > > > > k.
	Please click submit only once

Note: For security reasons your IP will be logged!