This is an archived message.
The reply function is disabled.
[ Message Forum | Thread Index | Post a Reply ]
Re: Pictures of my 85 head that I grabbed
| Posted By: | paul |
| Posted On: | December 06, 2004 at 10:22 am GMST |
paul wrote:
> well.. here are the pictures o
> f the head that I grabbed offa
> an 85.
>
> http://www.eskabodaan.org/dart
> /celica_port_close.jpg
>
> http://www.eskabodaan.org/dart
> /celica_port_overview.jpg
>
> tell me what you guys think.
>
>
> Derek wrote:
>
> > If you are 100% certain the
> ce
> > lica you pulled it from is a
> n
> > 85, it WILL NOT WORK. None o
> f
> > the 85's got the early 22RE
> wi
> > th the dome pistons, only th
> e
> > late 22RE with the flat ones
> .
> >
> >
> > Erick wrote:
> >
> > > Some 85 Celica's used the
> 84
> > m
> > > otor which is the same as
> 83
> > .
> > > Check to see if the exhaus
> t
> > po
> > > rts are the same. You do
> no
> > t
> > > want the key hole shaped p
> or
> > ts
> > > . This head would then be
> f
> > ro
> > > m the new 85 motor and you
> r
> > 83
> > > pistons will not allow you
> t
> > o
> > > use it. 83 has the dome to
> p
> > p
> > > iston and the newer 85 is
> de
> > si
> > > gned to be used with the f
> la
> > t
> > > top piston. Once the bad 8
> 3
> > he
> > > ad is off, you will see if
> t
> > he
> > > y are exactly the same and
> i
> > f
> > > not, the differences will
> no
> > ti
> > > cable.
> > >
> > >
> > > pahhhoul wrote:
> > >
> > > > I cracked the head on my
> 8
> > 3
> > > 22
> > > > RE engine. I grabbed a 2
> 2R
> > E
> > > he
> > > > ad offa 85 celica.
> > > >
> > > > Please tell me that the
> 85
> > 2
> > > 2R
> > > > E head will work on my 8
> 3
> > bl
> > > oc
> > > > k.
Replys:
Note: For security reasons your IP will be logged!
Copyright © 2001 - 2003 Steven Benner. All rights reserved.
Last Modified: Wednesday, March 19, 2003 9:00 AM