Welcome, Guest

Author Topic: Wirign Diagrama  (Read 1206 times)

Offline tomyc48

  • Bronze Member
  • Senior Master
  • *
  • Posts: 6,556
    • View Profile
Wirign Diagrama
« on: Aug 30, 2006, 12:20:12 pm »
i need  the wiring diagram for the EFI, and the pinouts on the ECU for a 1985 Celica GTS.  if anyoen has them can you please help me out. it's the only thign i need yet to  finish my 7M swap. thanks guys.
* FCV=future celica victim
83 Celica GT-S (daily driver/ pizza car)
88 MK3.  RIP
81 MK1 (2JZ project) on hold.
85 Celica GT (pizza car)RIP
85 Celica GT-S 7M-GTE swap. sold to craig.
83 Celica GT 2xR hybrid (V-TEC EATER) RIP
81 Celica GT (the Origanal V-TEC Eater) RIP
79 Celica GT (woman driver/red light, enough said) RIP

Offline Teranfirbt

  • Global Moderator
  • Grand Master
  • *******
  • Posts: 23,920
    • View Profile
Wirign Diagrama
« Reply #1 on: Aug 30, 2006, 01:32:01 pm »
I know I have the pinout somewhere, I'll dig em up after work..

240SX Strut bar write up Here
"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former." ~ Albert Einstein

Offline tomyc48

  • Bronze Member
  • Senior Master
  • *
  • Posts: 6,556
    • View Profile
Wirign Diagrama
« Reply #2 on: Aug 30, 2006, 08:44:07 pm »
sweet thanks.
* FCV=future celica victim
83 Celica GT-S (daily driver/ pizza car)
88 MK3.  RIP
81 MK1 (2JZ project) on hold.
85 Celica GT (pizza car)RIP
85 Celica GT-S 7M-GTE swap. sold to craig.
83 Celica GT 2xR hybrid (V-TEC EATER) RIP
81 Celica GT (the Origanal V-TEC Eater) RIP
79 Celica GT (woman driver/red light, enough said) RIP

Offline wyoming9

  • Gold Member
  • Forum Master
  • *
  • Posts: 1,735
    • View Profile
Wirign Diagrama
« Reply #3 on: Aug 30, 2006, 09:37:52 pm »
tomy don`t you have to swap the harness and ECU from the Supra being 6 cylinders or will the four cylinder one  work I also could be wrong

Offline tomyc48

  • Bronze Member
  • Senior Master
  • *
  • Posts: 6,556
    • View Profile
Wirign Diagrama
« Reply #4 on: Aug 30, 2006, 10:03:57 pm »
i ahve the harness i need but i guess the guy wiring it needs to know certain wires in GT-S i found my toyota repair manual will it be in there?
 
* FCV=future celica victim
83 Celica GT-S (daily driver/ pizza car)
88 MK3.  RIP
81 MK1 (2JZ project) on hold.
85 Celica GT (pizza car)RIP
85 Celica GT-S 7M-GTE swap. sold to craig.
83 Celica GT 2xR hybrid (V-TEC EATER) RIP
81 Celica GT (the Origanal V-TEC Eater) RIP
79 Celica GT (woman driver/red light, enough said) RIP

Offline wyoming9

  • Gold Member
  • Forum Master
  • *
  • Posts: 1,735
    • View Profile
Wirign Diagrama
« Reply #5 on: Aug 31, 2006, 12:01:58 am »
I found it in the haynes manual the one for 82 to 85 only but I don`t have a scanner you can use my garage copy if you want

Offline Teranfirbt

  • Global Moderator
  • Grand Master
  • *******
  • Posts: 23,920
    • View Profile
Wirign Diagrama
« Reply #6 on: Aug 31, 2006, 12:22:43 am »
This is for a truck, but it's the same as an 85...

240SX Strut bar write up Here
"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former." ~ Albert Einstein

Offline tomyc48

  • Bronze Member
  • Senior Master
  • *
  • Posts: 6,556
    • View Profile
Wirign Diagrama
« Reply #7 on: Aug 31, 2006, 02:14:40 am »
Quote
I found it in the haynes manual the one for 82 to 85 only but I don`t have a scanner you can use my garage copy if you want
thanks guys,  i'm gonna have to come up soon anyway thogh to drop off that  ignitor and get teh 7M out and broken in.


thanks again teran.
* FCV=future celica victim
83 Celica GT-S (daily driver/ pizza car)
88 MK3.  RIP
81 MK1 (2JZ project) on hold.
85 Celica GT (pizza car)RIP
85 Celica GT-S 7M-GTE swap. sold to craig.
83 Celica GT 2xR hybrid (V-TEC EATER) RIP
81 Celica GT (the Origanal V-TEC Eater) RIP
79 Celica GT (woman driver/red light, enough said) RIP

Offline danf

  • Forum Master
  • *****
  • Posts: 1,921
    • View Profile
Wirign Diagrama
« Reply #8 on: Aug 31, 2006, 03:44:02 am »
I just looked in my 85 GTS factory manual and the pins are the same, but the celica doesn't use all the pins that are listed there. Some of those are obvious, like the 4WD one.

I dropped my scanner, so it won't scan worth crap, so I can't post up mine.
 
SELECT celica FROM toyota WHERE year<=1985;

1985 GT-S
-Rebuilt engine: bored .020 over, oversize valves, new cam
-Thorley header w/heated O2 sensor at collector & all new exhaust
-Impact6 strut bar
-3.9LSD rearend, which is now slipping
-Lots of bodywork and new paint!
-New cd player to cover up all those squeaks and rattles
-JK short-throw shifter


Offline OldMage

  • Guru of Useless Tidbits
  • Global Moderator
  • Senior Master
  • *******
  • Posts: 8,333
    • View Profile
    • http://celica-gts.com/users/oldmage
Wirign Diagrama
« Reply #9 on: Aug 31, 2006, 04:04:51 am »
Quote
I just looked in my 85 GTS factory manual and the pins are the same, but the celica doesn't use all the pins that are listed there. Some of those are obvious, like the 4WD one.

I dropped my scanner, so it won't scan worth crap, so I can't post up mine.
Take a good digi-cam pic of it.  I find that works better for manuals w/ thin pages.  Too much bleed-thru when scanning.


'83 Celica GT-S coupe - EFI hybrid
'03 Prius - DD/corner-carver

My Home Page My Photobucket

Offline tomyc48

  • Bronze Member
  • Senior Master
  • *
  • Posts: 6,556
    • View Profile
Wirign Diagrama
« Reply #10 on: Aug 31, 2006, 04:38:26 am »
i found my factory repair manual in my shed about 15 minutes ago. and soemoen posted the pinouts from the 7M-GTE for me on teh celicasupra.com forum
* FCV=future celica victim
83 Celica GT-S (daily driver/ pizza car)
88 MK3.  RIP
81 MK1 (2JZ project) on hold.
85 Celica GT (pizza car)RIP
85 Celica GT-S 7M-GTE swap. sold to craig.
83 Celica GT 2xR hybrid (V-TEC EATER) RIP
81 Celica GT (the Origanal V-TEC Eater) RIP
79 Celica GT (woman driver/red light, enough said) RIP

Offline danf

  • Forum Master
  • *****
  • Posts: 1,921
    • View Profile
Wirign Diagrama
« Reply #11 on: Aug 31, 2006, 06:22:14 am »
Quote

Take a good digi-cam pic of it.  I find that works better for manuals w/ thin pages.  Too much bleed-thru when scanning.
Digital camera? What's that? :D
SELECT celica FROM toyota WHERE year<=1985;

1985 GT-S
-Rebuilt engine: bored .020 over, oversize valves, new cam
-Thorley header w/heated O2 sensor at collector & all new exhaust
-Impact6 strut bar
-3.9LSD rearend, which is now slipping
-Lots of bodywork and new paint!
-New cd player to cover up all those squeaks and rattles
-JK short-throw shifter


Offline dsshon

  • Junior Member
  • **
  • Posts: 134
    • View Profile
Wirign Diagrama
« Reply #12 on: Aug 31, 2006, 11:50:57 pm »
Quote
I just looked in my 85 GTS factory manual and the pins are the same, but the celica doesn't use all the pins that are listed there. Some of those are obvious, like the 4WD one.

I dropped my scanner, so it won't scan worth crap, so I can't post up mine.
I have a scanner and a Haynes manual. Tell me what page and I will post it.