| Many thanks to TimK of Tim's Toys & Nathan Kahler for being curious enough to dive into this project feet-first!! | |
|
|
| Welded up, bosses added and ready to port. | EFI Water passage opened up, intake ports marked for 22RE gasket match. |
|
|
| #4 intake gasket matched, good detail of mount added to #3. | Nice closeup of 4th & 3rd intakes after gasket matching. |
|
|
| Nice closeup of EFI coolant port and 2nd & 1st intakes after gasket matching. | Intake side, ready to surface. |
