| Many thanks to Shayne Waite for his amazing portwork!! |
 |
 |
| Intake ports after full porting to 22RE gasket. Probably the best view of the EFI coolant port. |
Intake ports again, w/out flash so intake surface is more visible. |
 |
 |
| Shot of the deck surface, showing the 45mm/38mm stainless Ferrea Competition Plus valves. |
Same view, again w/out flash for different contrast. |
 |
 |
| Closeup of the exhaust ports. The air-injection plugs were already installed when TimK & NathanK received the head. |
Same view w/ flash so the bowl area behind the valves is visible. |
 |
 |
| Closeup of where #3 intake broke through while porting. |
Closeup of JB Weld sealing #3 intake. |
 |
 |
| Extreme closeup of #3 chamber, showing valves & JB Weld. |
Extreme closeup of an exhaust port showing the bowl area behind the valve. |
