Welcome, Guest
Login or Register
Home
Pages: 1 2 3 [4]  All

Author Topic: Altering Bob's sleigh  (Read 6419 times)

Offline a2ndopinion

  • Grand Master
  • *******
  • Posts: 22,334
  • PDX, OR Master Debater and Cunning Linguist
    • View Profile
    • http://a2ndopinionvehicleinspections.com
Re: Altering Bob's sleigh
« Reply #45 on: Oct 17, 2009, 05:09:20 pm »
What the hell was that?
« Last Edit: Oct 17, 2009, 07:37:33 pm by a2ndopinion »
Logged
ASE certified: Master Auto, Truck, Machinist & Collision Repair/Refinish Tech/Damage Estimator, Undercar & Parts Specialist, Service Advisor; Oregon Certified Vehicle Appraiser
DD - '81 Corona wagon - Weber, Cannon, MSD, Thorley, Magnaflow cat, 2.25" mandrel bent, Dynomax Bullet, Borla Pro XS, RA6x front suspension, Cressi Big Brakes, Mk II Addco, T3 RCAs & camber plates, coilovers, SW20/Camaro AGXs front/rear, all urethane bushings, Hilux overlloads...

Offline 85GTS

  • Bronze Member
  • Grand Master
  • *
  • Posts: 13,747
  • Wannabe Toyota collector- Oregon City, OR
    • View Profile
Re: Altering Bob's sleigh
« Reply #46 on: Oct 17, 2009, 05:41:52 pm »
how about a 1st gen front end :P
Logged
85 Celica GT-S LB "Blue"

78 Celica ST coupe "Sleepra"

00 Lexus GS 400

91 Lexus ES 250

88 Celica All-Trac

04 Sequoia (wifes)

17 Chevy Bolt EV (daily)

The Second Amendment will always be under attack because it is the only veto held by the people.

Offline a2ndopinion

  • Grand Master
  • *******
  • Posts: 22,334
  • PDX, OR Master Debater and Cunning Linguist
    • View Profile
    • http://a2ndopinionvehicleinspections.com
Re: Altering Bob's sleigh
« Reply #47 on: Oct 17, 2009, 07:38:44 pm »
I think then you are getting too many years apart - the wagon is an '81 after all.
Logged
ASE certified: Master Auto, Truck, Machinist & Collision Repair/Refinish Tech/Damage Estimator, Undercar & Parts Specialist, Service Advisor; Oregon Certified Vehicle Appraiser
DD - '81 Corona wagon - Weber, Cannon, MSD, Thorley, Magnaflow cat, 2.25" mandrel bent, Dynomax Bullet, Borla Pro XS, RA6x front suspension, Cressi Big Brakes, Mk II Addco, T3 RCAs & camber plates, coilovers, SW20/Camaro AGXs front/rear, all urethane bushings, Hilux overlloads...

Offline shonuff

  • Senior Master
  • ******
  • Posts: 5,014
    • View Profile
    • Black Sheep Auto
Re: Altering Bob's sleigh
« Reply #48 on: Oct 18, 2009, 02:37:24 am »
enuff of the speculation time to nut up or shut up.



you should test fit a celica fender to see if its really even possible, would only take about 30min.
Logged

Offline ozzie

  • Senior Master
  • ******
  • Posts: 9,905
    • View Profile
Re: Altering Bob's sleigh
« Reply #49 on: Oct 18, 2009, 03:49:56 am »
Quote from: shonuff on Oct 18, 2009, 02:37:24 am
you should test fit a celica fender to see if its really even possible, would only take about 30min.

Seconded :)
Logged
'84 Celica GT - 261k mi

Offline a2ndopinion

  • Grand Master
  • *******
  • Posts: 22,334
  • PDX, OR Master Debater and Cunning Linguist
    • View Profile
    • http://a2ndopinionvehicleinspections.com
Re: Altering Bob's sleigh
« Reply #50 on: Oct 18, 2009, 06:05:22 am »
A 3rd gen fender definitely won't fit. The back at the top is completely different, so would require cutting and welding at the front. I think the second gen may be a different story though...
Logged
ASE certified: Master Auto, Truck, Machinist & Collision Repair/Refinish Tech/Damage Estimator, Undercar & Parts Specialist, Service Advisor; Oregon Certified Vehicle Appraiser
DD - '81 Corona wagon - Weber, Cannon, MSD, Thorley, Magnaflow cat, 2.25" mandrel bent, Dynomax Bullet, Borla Pro XS, RA6x front suspension, Cressi Big Brakes, Mk II Addco, T3 RCAs & camber plates, coilovers, SW20/Camaro AGXs front/rear, all urethane bushings, Hilux overlloads...
Pages: 1 2 3 [4]  All