Welcome, Guest

Author Topic: Clunking under hard breaking?  (Read 678 times)

Offline Gt22R

  • Newbie
  • *
  • Posts: 9
    • View Profile
Clunking under hard breaking?
« on: Jul 14, 2017, 07:05:36 pm »
So yesterday on my way home I was on the highway off ramp and had to come to a hard stop, there was a thud, sounded like my driveline was slapping under my elbow, my guess is carrier bearing, question is how hard is it to replace, do I need a press?
1982 GT 22r 310k ;);)

Offline swan song

  • Forum Master
  • *****
  • Posts: 3,310
  • Enter Final Phase
    • View Profile
Re: Clunking under hard breaking?
« Reply #1 on: Jul 14, 2017, 08:20:31 pm »
Could be. If it's The driveshaft center bearing, forget it. Time to swap to a one piece drive shaft from a yota pickup. The new center bearings never work, even though the part number says it's correct!!!
« Last Edit: Jul 14, 2017, 08:35:38 pm by swan song »
1985 celica GT , 191k.
Want a low budget LSD? http://www.celica-gts.com/forums/index.php?topic=29189.0

***COMPLETED!***1uzfe swap! Instant NA 250hp/260tq, For less than $1,500!

Offline 85GTSvert

  • Junior Member
  • **
  • Posts: 100
    • View Profile
Re: Clunking under hard breaking?
« Reply #2 on: Jul 16, 2017, 01:24:50 pm »
Could also be a bad trans mount. Does it clunk on take off?
1985 Celica GT-S convertible- the popular one @ 264k mi
2002 Hyundai Santa Fe 2.7 V6- the semi-restored survivor @ 229k mi
2020 Hyundai Elantra GT N-Line 6-speed- not a GTI @ 38k mi

Yeah- I got a lot of toys. ‘85 GT-S bumpin’ Pet Shop Boys