T3 ORDER it begins

[twotone_ra64]

Cool!! And I see some nice and shiny parts! I noticed you got the rear swaybar control brackets, I'd be curious to see how those work out! I just got Superpro poly bushings for my rear sway bar (minus the bar-to-axle bushings because they are 15mm).

[Sigma Projects]

*drool* love T3 parts.

[666COS]

Had to elongate the holes by about 1/16 of an inch to get these to work.  Other than that they line up

[666COS]

Drop links also work.  Had to remove the slot.  I have a whiteline sway bar showing up sometime this week. Also still waiting on my 4 link, rear springs and shocks, front Coil overs and strut rods

[Sigma Projects]

Had to elongate the holes by about 1/16 of an inch to get these to work.  Other than that they line up

Where is that part part on T3's site?

[twotone_ra64]

Nice! Cool too see that it fits in the end!

Sigma, It's listed under the AE86

[Sigma Projects]

ah I see, coo thanks.

[666COS]

Both those parts are listed for the AE86.  I just took a chance 

[twotone_ra64]

I just watched your latest video! I was wondering about those rear swaybar droplinks and how you were going to use it with the stock swaybar, but if you can get the AE86 whiteline bar to fit, that would be super cool. That rear axle is the Mk1 Supra F-code, right?

[666COS]

Yep that's a mk1 supra F-code.  The sway for the ae86 has the same dimensions as my original RA64 one.  I had whiteline measure it up. 

[666COS]

Its arrived.