Welcome, Guest

Author Topic: Behold the T3 quad caliper setup  (Read 304 times)

Offline 666COS

  • Junior Member
  • **
  • Posts: 128
    • View Profile
Behold the T3 quad caliper setup
« on: May 24, 2019, 09:03:01 pm »
So finally got around to installing the quad caliper setup.  Wasn't bad at all.  Had to cut back the brake lines 2 inches on each side and flare them.  The half moon spacers were stupid hard to install. Other than that they were easy.
Used new cardone ae86 calipers for brakes and the 1980 celica-supra handbrake cables

Tires are on the way

Watch for the video soon.
RA65 1983. 
Mk2 lotus Cortina(have lots of spare parts for mk1 & mk2 cortinas)

Online twotone_ra64

  • Global Moderator
  • Forum Master
  • *******
  • Posts: 1,825
  • BACC Founder, Mechanical Design Engineer
    • View Profile
Re: Behold the T3 quad caliper setup
« Reply #1 on: May 28, 2019, 04:37:34 pm »
Whoa, very nice! I saw the video went up not too long ago, I'll have to give it a watch. :)
'84 Celica GT - Phase 2 In Progress! (159k); W58 5-speed swap, Koni x Swift x T3 suspension, 22R-E delete, TRD 2-way LSD, Konig Rewind 15x7 +0mm, zenki taillights, '98 Camry cassette player for maximum a e s t h e t i c

'91 Miata - Daily/Track (235k); the driver's perfect roadster; BP-5A 1.8L swap, NB Koni x Ground Control coilovers, GWR endlinks, FM sway bars, HD Deuce rollbar


 

cognitive