Author Topic: Comprehensive Sra Suspension Tuning Guide (Read 75179 times)

tsunamiDry · « **Reply #60 on:** May 24, 2007, 07:19:16 am »

I have a quick question. I'm looking to get new struts for my fully shot suspension. I guess for struts I can just pick up some Tokico Blues. What part number do I get for the rear? I have an '84 GT (solid axle). Do I get HE2572 or HE2483?

Sigma Projects · « **Reply #61 on:** May 24, 2007, 08:22:57 am »

if you can't find the rears specifically the 3rd gen camaros 82~92 rear shocks fit our cars from what I hear on the boards.

unisoundSD · « **Reply #62 on:** May 29, 2007, 09:00:02 am »

in the first links to 185performance those dobinsons only say they fit ra65...do they fit ra 64 or not?? i have a 84 gt coupe...

Teranfirbt · « **Reply #63 on:** May 29, 2007, 05:51:29 pm »

http://www.185performance.com/zen/index.ph...roducts_id=3107
Front
http://www.185performance.com/zen/index.ph...roducts_id=3106
Rear

unisoundSD · « **Reply #64 on:** May 29, 2007, 06:23:17 pm »

no i saw the links working again, but the applications say it only fits RA65 does it also fit RA64??

Teranfirbt · « **Reply #65 on:** May 29, 2007, 06:26:35 pm »

OH
Yes, they will fit the RA64.. Dob's are Aussie, they call the SRA models RA60's there.

unisoundSD · « **Reply #66 on:** May 29, 2007, 06:32:12 pm »

thanks teran, another quick question those coils will fit the rear of mine too??

Teranfirbt · « **Reply #67 on:** May 29, 2007, 06:32:59 pm »

Yep, they both list RA60.

unisoundSD · « **Reply #68 on:** May 29, 2007, 06:38:08 pm »

ha i knew that i was just reading the "solid rear axle models only"

Teranfirbt · « **Reply #69 on:** May 29, 2007, 09:07:33 pm »

Which you have o_O

unisoundSD · « **Reply #70 on:** May 30, 2007, 12:48:10 am »

yeah well i didn't read the last part where it said solid rear axles only haha and who makes a direct fit adjustable shock/strut all around my car, i don't want to mix and match different suspension components i want the same shock all around and preferably adjustable...

Teranfirbt · « **Reply #71 on:** May 30, 2007, 01:05:14 am »

You're a bit out of luck there... Your best bet is to run SW20 MR2 rear struts in the front and then the same type of F body (80's) Camaro rear shocks in the rear. KYB AGX works rather nicely.

timottaway · « **Reply #72 on:** May 30, 2007, 03:25:24 am »

anybody done a rear coilover kit?

I need some rear height adjustabilty for a competitive drift car i run over here in Aus...

Sigma Projects · « **Reply #73 on:** May 31, 2007, 12:02:44 pm »

no off the shelf kits. Looking at this restoration you can see what they did http://www.mat.fi/project1984toyotacelicaturbo.htm

I've also heard about people using an upside down coil over kit to fit where the shocks are now.

Forcer · « **Reply #74 on:** Jun 01, 2007, 04:59:56 pm »

Off topic: Do you have any more pics of your Celica drifting?